Device settings, Ethernet link check, Chapter 2 – Thomson SpeedTouch™546 User Manual
Page 26
Advertising
Chapter 2
Local Network Setup
E-DOC-CTC-20050429-0100 v1.0
18
Device settings
Once you’ve connected a device, you are able to personalise its settings:
1
Go to the SpeedTouch™ web pages.
2
In the menu select Home Network > Devices.
3
Click the name of your device, or if the device’s settings haven’t been
personalised yet, click the MAC address of the device.
4
On the top right, click Configure.
5
Now you can change the device’s name, lock its IP address and assign
applications and services to the device.
Ethernet link check
Depending on the SpeedTouch™ model, LED indicators allow you to check your
Ethernet. See
“1.2 SpeedTouch™ LED Behaviour” on page 8
for more information.
Advertising