Using the 10-bin mailbox/collator, Mailbox sorter modes, Printing to the mailbox/collator – Xerox N3225 User Manual

Page 89: Using the 10-bin mailbox/collator -31

Advertising
background image

Using the Control Panel

Chapter 3: Printing

3-31

Using the 10-bin

Mailbox/Collator

The 10-bin Mailbox/Collator is an optional output device
available for the printer. It handles all supported paper
sizes, except A6 and envelopes, in 10 individually
addressable bins at up to 100 sheets per bin.

Mailbox Sorter Modes

There are two different Mailbox/Sorter modes provided by
the 10-Bin Collator:

• Mailbox Mode: Each mailbox bin can be addressed

individually using the job destination functionality
contained in the printer driver.

• Sorter Destination Mode: The mailbox works like a

copier sorter when multiple sets are printed. When up
to 10 sets are requested, the first set is sent to Bin 1, the
second set to Bin 2, and so on.

If more than 10 copies are selected, the entire job is sent
to the Face-down Bin.

Printing to the Mailbox/Collator

To send a job to the mailbox, use a printer driver to select
a specific bin for the output destination for your job or
select the sorter mode and then print your job.

Advertising
This manual is related to the following products: