Panasonic ERCA70 User Manual

Page 6

Advertising
background image

6

English

Cleaning the blade

If washing in water

Warning ‑ Detach the hand held part from the power cord before
cleaning it in water.

1. Rinse off any hairs

sticking to the blade and
any hairs inside the
clipper.

2. Shake the clipper 4 or 5

times gently, wipe off any
water drops from the
clipper and blade, and
then let it dry onto a towel
with the “Washable”
indicator facing upward.

If cleaning with brush

1. Brush off

any hairs
from the
clipper and
from around
the blade.

2. Remove the

blade and
brush off
the hairs
from the
blade edge.

3. Brush the hairs out

from between the fixed
blade and the moving
blade while pressing
down on the lever for
cleaning to raise the
moving blade.

After cleaning the blade with water or brush

1. Apply a few drops of the oil to the points

indicated by the arrows.

2. Remount the blade on the clipper.

Apply the oil to the clipper after use. Otherwise
the blades may become dull, make abnormal
noises, or becomes hot and lead to the
deterioration of cutting performance.

Removing the built-in rechargeable battery

Remove the battery as illustrated.

Disconnect the clipper from the AC adaptor when removing the

battery.

Fully discharge the battery.
Be careful not to short the + and ‑ terminals of the battery after

removing it.

1.

.
3.

Advertising
This manual is related to the following products: