AT&T Definity 7314H - Manual (Page 17)

Bridging
To answer a bridged call 1 Press xxxxx of bridged call
Note: If your voice terminal has Ringing
Appearance Preference, this step is not necessary;
you will automatically be connected to the call when
you lift the handset.
To use Manual Exclusion
to prevent other bridged
terminals from entering a
call (on a per-call basis) 1 Press Exclusion xxxxx while connected to the call
Note: Pressing Exclusion xxxxx again reactivates
bridging.
Call Coverage
To answer a call for a co-
worker for whom you are
a coverage point 1 Press xxxxx of incoming call when ring begins or
green light flashes
Note: If your voice terminal has Ringing
Appearance Preference, this step is not necessary;
you will automatically be connected to the call when
you lift the handset. Also, the call is not at your
voice terminal until the green light is flashing.
To leave a message for a
co-worker to call the
original caller’s extension 1 Press Coverage Callback while connected to the call
[confirmation tone]
Note: To leave a message for a co-worker to call you,
activate Leave Word Calling instead.
15