AT&T Definity 7314H - Manual (Page 23)

Internal Automatic Answer (int-aut-an)
To answer internal calls
automatically 1 Press int-aut-an
Note: Pressing int-aut-an has no affect on an active
call.
2 An internal call is received
Distinctive tone burst is sent, via the speaker or
headset, and then the call is automatically
answered
Speakerphone and microphone are automatically
activated
Note: You can press Microphone to turn the
microphone off (while on a call) for privacy or you
can lift the handset after the call is automatically
answered.
Note: If you have an IAA
call in progress, and your
voice terminal has an idle
line preference (second
call appearance is
reserved for outgoing
calls), subsequent callers
will receive a busy signal.
To answer a second
internal call while an IAA
call is in progress 1 Place the first call on hold, and answer the second
call
Note: The second call will not be automatically
answered.
To answer a second
internal call while an IAA
call is in progress, and a
hunt group has been
administered 1 Complete the first call
Distinctive tone burst is sent, via the speaker or
headset, and the next call (waiting in queue) is
automatically answered
Note: A hunt group queue lamp can be administered
to indicate that a call is waiting.
To cancel internal
automatic answer 1 Press int-aut-an again
21