ASTAR ASTAR 27''HDTV - Manual (Page 23)

2.5 -Connecting Coaxial (RF)
There are several options for connecting your antenna(or cable for TV) to your new 27''HDTV-directly to
the DTV, NTSC TV or through your VCR. Based on your home theater configuration, you can decide which
option is the right one for you.
2.5.1-Using Your Antenna or Cable for DTV
1.Turn off the power to your LCD TV.
2.Connect the coaxial (RF) connector from your Antenna or Digital Cable to the AIR IN or CABLE IN
connector in the rear of your LCD TV.
3.Turn on the power to your LCD TV.
4.Select DTV using the INPUT button on the front of the LCD TV or directly by pressing the DTV/ATV
button on the Remote Control.
Note:
a)Digital broadcasts are not available in all areas.
b)Make sure the antenna is correctly grounded.
c)For professional antenna installation, please contact ASTAR Electronics at 1-877-851-2528 or
visit our website at www.astarelectronics.com.
www.astarelectronics.com
23
2.5.2 - Using Your Antenna or Cable for TV
1.Turn off the power to your LCD TV .
2.Connect the cocoaxial (RF) connector from your antenna, cable or cable box to the TV connector in the
rear of your LCD TV.
3.Turn on the power to your LCD TV.
4.Select TV using the INPUT button on the Remote control or front of your LCD TV or directly by pressing
the DTV/ATV button on the Remote Control.
IN
Y-2 Pb/Cb-2 Pr/Cr-2 L-2 R-2 AUDIO
Y-1 Pb/Cb-1 Pr/Cr-1 L-1 R-1 AUDIO
VIDEO IN L-3 R-3 AUDIO
S-VIDEO IN L-4 R-4 AUDIO
AV DIGITAL
AUDIO
OUT
L
R
AUDIO
IN
HDMI-IN VGA IN
AIR IN CABLE IN
DIGITAL HD