Air-O-Swiss AOS 7147 - Manual

PLEASE READ FIRST
Finding the ideal location for your
unit: Do not place the humidifier
directly next to a heating or air vent.
The unit should be placed in an
elevated position, e.g. on a table,
chest, etc. at least 3 ft off the floor.
Keep it away from doors or win-
dows.
The mist outlet must not be pointed
directly at plants or other objects.
Keep a distance of at least 20 in-
ches (50cm).
WARNING! Do not touch the
water in the base during operation!
Switch off the unit first. Place the
Ionic Silver Stick in the base of the
unit.
Soak the demineralization cartridge in a water bath for 24 hours before the
first use; the granules have to absorb water to reach high performance.
WARNING! If the cartridge is soaked in the tank, make sure to exchange the water and empty
the water from the base before using the humidifier.
Fill the tank with clean, cold water
from the tap.
Do not pour water into the mist
outlet of the appliance.
WATER QUALITY MAINTENANCE WITH IONIC SILVER STICK ®
DO NOT DISCARD! Save for future reference.
Please read the manual or check our website www.airoswiss.net for further information.
Lifecycle Indicator
Your appliance comes with a lifecycle indicator
for changing the Ionic Silver Stick ® . To remind
yourself when you put the ISS into operation,
please check the current month on the stamp
and write the current year on the line provided.
Water Quality Maintenance
The Ionic Silver Stick ® (ISS) keeps the water free of microbial
growth. The ISS uses the anti-microbial effect of silver to prevent
the growth of microbes in the water base. It begins to function
as soon as it comes into contact with water, even if the unit is
switched off. The Ionic Silver Stick should be changed every year.
SOAK CARTRIDGE 24 HOURS BEFORE FIRST USE
FILL THE TANK WITH FRESH COLD WATER
QUICK SET UP GUIDE AOS 7147
QUICK OPERATION DESCRIPTION AOS 7147
D
E
F
H
I
J
L
A
B
C
G
K
M
A On/Off dial
B Hygrostat (setting the humidity level)
C Timer (1h – 8h or CO)
D Mist output (regulating mist output)
E Operation with pre-heating (warm mist)
F Automatic mode and Sleep mode
G Timer indicator
H Mist output indicator
I Pre-heating indicator
J Automatic mode indicator
K Sleep mode indicator
L Empty indicator
M Cleaning indicator
Take off the water tank cap to fill
the tank with water.
Close the cap of the water tank
securely, place the water tank onto
the base. The water is now running
from the tank into the base. The
empty indicator light may stay
illuminated for some seconds until
the base is filled with water.
Insert the plug into the socket and
switch on the appliance using the
On/Off Dial.
24 h
1 2 3 4
5
6 7 8 9 10