Selecting power & cook time, Quick min feature, Keep warm feature – Panasonic NN-SD772S User Manual

Page 13

Advertising
background image

11

selecting Power

& cook time

notes:

1. For more than one stage cooking, repeat

steps 1 and 2 for each stage of cooking

before pressing start Button. The maxi-

mum number of stages for cooking is 3.

When operating, two beeps will sound

between each stage. Five beeps will

sound at the end of the entire sequence.

2. When selecting P10 (HIGH) power for

the first stage, you may begin at step 2.

3. When selecting P10 (HIGH) power, the

maximum programmable time is 30 min-

utes. For other power levels, the maxi-

mum time is 90 minutes.

4. For reheating, use P10 (HIGH) for liq-

uids, P7 (MED-HIGH) for most foods and

P6 (MEDIUM) for dense foods.

5. For defrosting, use P3 (MED-LOW).
do not over cooK. This oven requires

less time to cook than an older unit. Over

cooking will cause food to dry out and may

cause a fire. A microwave oven’s cooking

power tells you the amount of microwave

power available for cooking.

example: to cook at P 6 (MediuM)

power for 1 minute 30 seconds

1.

• Press Power level

until the desired

power level appears

in the display window.

2.

• Set Cooking Time,

using Time Select Dial

to 1 minutes and 30

seconds.

3.

• Press start.

Cooking will start.

The time in the

display window will

count down.

Press 5 times

Press

once

twice

3 times

4 times

5 times

6 times

7 times

8 times

9 times

10 times

Power Level

P10 (HIGH)

P9

P8

P7 (MED-HIGH)

P6 (MEDIUM)

P5

P4

P3 (MED-LOW)/DEFROST

P2

P1 (LOW)

quick Min feature

This feature allows you to set or add

cooking time in 1 minute increments up to

10 minutes.

to set cooking time:

notes:

1. If desired, you can use other power

levels. Select desired power level

before setting cooking time.

2. quick Min Button can be used to add

more time during manual cooking.

1.

• Press quick Min until

the desired cooking

time (up to 10 min-

utes) appears in the

display window.

Power Level is pre-set

at P10.

2.

• Press start.

Cooking begins and the

time will count down. At

the end of cooking, 5

beeps sound.

Keep Warm feature

This feature will keep food warm for up to

30 minutes after cooking.

example: to keep 2 cups of gravy warm

1.

• Press Keep Warm.

2.

• Set warming time, up

to 30 minutes.

3.

• Press start.

Keep Warm will

start. The time in

the display window

will count down.

note:

Keep Warm can be programmed as the

final stage after cook time/s have been

manually entered. It cannot be used in

combination with sensor or auto features.

IP4088_3BE30AP_19_120221 2012-2-21 Jerry 下下14:01 Page 11

Advertising
This manual is related to the following products: