Panasonic HC-V250K - Manual (Page 147)

- 147 -
∫ About the screen indications in the Live Cast Mode
≥ In Live Cast Mode, even if you press the recording start/stop button, recording is not possible.
≥ In Live Cast Mode, this unit is set to Intelligent Auto Mode.
≥ If you start a live broadcast when the LCD monitor is closed with the screen facing outward, the
LCD monitor of this unit will turn off.
≥ If this unit is on the e-mail sender block list of destination devices or if their firewall setting is
enabled, the Wi-Fi function may not work correctly when you send an e-mail. If this occurs, check
the network settings.
≥ When the live broadcast cannot be watched on a USTREAM application for TVs or smartphones,
cancel the Password for the Program, and restart the broadcast.
≥ Image content may be leaked to third parties depending on the USTREAM image publication
method settings. Set the publication range and Password using USTREAM if required.
Touch to display the live broadcast setting
screen.
≥ / / will disappear when no touch function is
performed for a specific period of time. To display them again,
touch the screen.
/ Live broadcast indication
Image quality ( l 148 )
1h23m Elapsed time of the live broadcast
12fps Frame rate ( l 148 )
Number of people watching the live
broadcast
≥ Up to 9999 viewers can be
indicated. The indication does not
appear when the number is 0.
E-mail delivery setting
Live broadcast microphone setting
(
l 149 )
≥ The indication appears when
[Microphone On Air] is set to
[OFF].
Configuring the live broadcast settings

A [EXIT]