L 203 – Panasonic HC-V250K User Manual
Page 203
- 203 -
6
Install the Remote Pan Tilt Cradle so that its
home position will face the front of the subject.
≥ The home position runs through the center of the power
button.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥ As shown in the illustration, connect the USB cable or DC cable so that it
will not be caught in objects such as the moving part of the Remote Pan
Tilt Cradle and other cables. If the cable is caught in the moving part of
the Remote Pan Tilt Cradle, it may cause the recording position to
change or cause a malfunction.
≥ Install the Remote Pan Tilt Cradle in a location that meets the following
requirements:
j A location out of the reach of children and pets
j A level location with no obstacles
j A location approximately 2 to 3 m away from subjects
≥ Before mounting this unit on the Remote Pan Tilt Cradle, insert the SD card and the battery.
≥ When this unit is mounted on the Remote Pan Tilt Cradle, make sure to hold the Remote Pan Tilt
Cradle to carry them. Carrying them by holding this unit may cause malfunction.
≥ Do not use the Remote Pan Tilt Cradle for surveillance purposes.
≥ Do not force the Remote Pan Tilt Cradle to stop moving during panning/tilting operation.
≥ The Remote Pan Tilt Cradle is not capable of supplying power to this unit.
≥ When the Remote Pan Tilt Cradle detects a problem, its status indicator flashes, and both this
unit and the Remote Pan Tilt Cradle turn off.
≥ Connecting the Remote Pan Tilt Cradle to this unit. (
)
≥ Set [Panning Angle]/[Tilt Angle]/[Tilt Speed] in advance. (
)
1
Touch the desired Remote Pan Tilt Cradle Mode.
≥ If you touch [SETUP], the Setup menu will be displayed. (
)
Home position
Using the Remote Pan Tilt Cradle
Mode
Operation of the
Remote Pan Tilt Cradle
Description
[Party Scene]
The operation is automatic.
≥ The Remote Pan Tilt
Cradle works within the
recording range set in
[Panning Angle]/[Tilt
Angle].
At an event such as a party, recording will be
performed while the Remote Pan Tilt Cradle
automatically controls the recording direction
within the recording range.
≥ When a person or a moving object is detected,
recording of the person or the object takes
priority for a specific period of time.
[Moving Object]
When a moving object is detected within the
recording range, the object will be tracked
and recorded automatically.
[Manual]
The operation is manual.
This mode lets you manually operate the
Remote Pan Tilt Cradle.