Recording motion pictures, L 22 – Panasonic HC-V250K User Manual
Page 22
- 22 -
≥
Open the lens cover before turning on the unit. (
1
Open the LCD monitor, and set this
unit to Motion Picture Recording
Mode. (
)
2
Press the recording start/stop
button to start recording.
3
Press the recording start/stop
button again to pause recording.
≥ Recording can also be started/stopped by touching the recording button icon.
∫ Screen indications in the Motion Picture Recording Mode
≥ Screen display will disappear when no touch operation is performed for a specific period of time.
To display it again, touch the screen. (
≥ It will be constantly displayed when the remaining recordable time becomes less than 30 minutes.
≥ If the recording/playback button is pressed during motion picture recording, the recording
will stop and this unit will be switched to Playback Mode.
≥ To change the recording format, change the
[REC FORMAT] or
[REC MODE]. (
)
≥ Still pictures can be recorded while recording the motion picture. (
≥ The images recorded between pressing the recording start/stop button to start recording and
pressing it again to pause recording become one scene.
When you record with the [REC FORMAT] set to [MP4/iFrame], the scenes longer than
approximately 20 minutes will be automatically divided. (Recording will continue.)
Recording motion pictures
Recording mode
R 1h20m
Approximate remaining recordable time
≥ When the remaining time is less than
1 minute, R 0h00m flashes red.
0h00m00s
Recording time elapsed
≥ “h” is an abbreviation for hour, “m” for
minute and “s” for second.
≥ Each time the unit is put into recording
pause, the counter display will be reset
to 0h00m00s.
HC-V250
T
W
A
When you begin recording, ; changes
to ¥.
B
Recording button icon
0h00m00s
0h00m00s
0h00m00s
R 1h20m
R 1h20m
R 1h20m