Quick start, Alert sound – Panasonic HC-V250K User Manual
Page 34
- 34 -
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥ When in Quick Start Standby Mode about 50% of the power used in recording pause mode
is being consumed, so the recording time will be reduced.
≥ Quick Start will not work if there is no SD card inserted.
1
Select the menu.
2
Close the LCD monitor.
The status indicator A flashes green and the unit goes into
Quick Start Standby Mode.
≥
The lens cover does not close.
3
Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
≥ About 5 minutes have passed, the Quick Start Standby Mode is canceled, and the unit is turned
off.
≥ Depending on the recording conditions and menu settings, time for Quick Start may be longer
than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)]
)/[ECONOMY (AC)] (
), close the LCD monitor once and open it again.
≥ Turn the unit off using the power button.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this
sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (
)
[QUICK START]
: [SETUP]
# [QUICK START] # [ON]
MENU
HC-V550
[ALERT SOUND]
: [SETUP]
# [ALERT SOUND] # desired setting
(Volume low)/
(Volume high)/[OFF]
MENU