Wind cut, Mic setup – Panasonic HC-V250K User Manual
Page 74
- 74 -
This is for reducing the wind noise coming into the built-in microphones.
≥ Switch to Manual Mode. (
)
≥ This function’s default setting is [ON].
≥ When switching to Intelligent Auto Mode/Intelligent Auto Plus Mode, [WIND CUT] is set to [ON],
and the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
Recording setting of the built-in microphone can be adjusted.
≥ [MIC SETUP] will become [STEREO MIC] when the [REC FORMAT] is set to [MP4/iFrame].
[WIND CUT]
: [RECORD SETUP]
# [WIND CUT] # [ON]
[MIC SETUP]
: [RECORD SETUP]
# [MIC SETUP] # desired setting
[STEREO MIC]:
Sound from two directions is recorded in 2 ch by forward-facing
stereo microphones.
[ZOOM MIC]:
Sound is recorded with changing the directionality in conjunction
with the zoom operation. Sounds near the front of the unit are
recorded more clearly if you zoom in (close-up) and surrounding
sounds are recorded more realistically if you zoom out (wide angle).
MENU
MENU