Clock and timers, Sound effects, Using the auxiliary input – Panasonic SC-PMX9 User Manual

Page 14: Sound effects 1

Advertising
background image

V

QT

5

J68

14

Clock and timers

This is a 12-hour clock.

1

Press [CLOCK/TIMER] to select “CLOCK”.

2

Within 10 seconds, press [3, 4] to set the time.

3

Press [OK].

Press [CLOCK/TIMER] to show the clock for a few seconds.

Note:

• Reset the clock regularly to maintain accuracy.

The sleep timer switches off the system after the set time.

Press [SLEEP] repeatedly to select the setting (in

minutes).

To cancel, select “Off”.

To show the remaining time

Press [SLEEP].

Note:

• The sleep timer can be used together with the play timer.

• The sleep timer always comes first. Be sure not to set an

overlap of timers.

You can set the timer to come on at a certain time to wake

you up.

Preparation

Set the clock.

1

Press [CLOCK/TIMER] repeatedly to select “TIMER
Adjust”.

2

Within 8 seconds, press [3, 4] to set the start time.

3

Press [OK].

4

Do steps 2 and 3 again to set the end time.

To start the timer

1

Prepare the audio source you want to listen to and
set the volume.

2

Press [

F, PLAY].

F” is shown.

To cancel, press [

F, PLAY] again.

The system must be switched off for the timer to

operate.

To check the settings

Press [CLOCK/TIMER] repeatedly to select “TIMER

Adjust”.

Note:

• The timer starts at a low volume and increases gradually to

the preset level.

• The timer comes on at the set time every day if the timer is

on.

• If you switch off the system and switch on again while a

timer is in operation, the timer will not stop at the end time.

Sound effects

1

Press [SOUND] to select a sound effect.

2

Press [2, 1] to select the desired setting.

By main unit only

Turn [BASS] or [TREBLE] to adjust the level.

Press [PRESET EQ] to select a setting.

This function lets you enjoy a powerful bass effect.
Press [D.BASS] to select “On D.BASS” or “Off D.BASS”.

Using the auxiliary input

You can connect a VCR, DVD player etc. and listen to the

audio through this system.

Preparation

Connect the external equipment.

1

Press [SELECTOR] repeatedly to select “AUX”.

2

Play the external equipment.

Setting the clock

Sleep timer

30min

>

60min

>

90min

>

120min

>

Off

^-----------------------------------------------------------b

Play timer

Changing the sound quality

BASS

-4 to +4

TREBLE

Surround

“On Surround” or “Off Surround”

Preset EQ

Heavy

Adds punch to rock

Soft

For background music

Clear

Clarifies higher frequencies

Vocal

Adds gloss to vocal

Flat

Cancels the sound effect

D.BASS

SC-PMX9PP-VQT5J68_mst.book 14 ページ 2014年3月4日 火曜日 午前11時13分

Advertising