Panasonic SC-PMX9 - Manual (Page 9)

9
V
QT
5
J68
With this method, you will access this system’s wireless
network settings from the Internet browser of your compatible
device.
• The following explanations are based on an iPhone.
1
Press [SETUP] on the remote control repeatedly to
select “Net Setup” and then press [OK].
“With iPod” is indicated on the display.
2
Press [SETUP] on the remote control repeatedly to
select “Manual” and then press [OK].
“Setting” blinks on the display.
3
After “Setting” blinks, connect your compatible
device to this system’s wireless network named
“00 Setup _ _ _ _ _ _”.
• “ _ ” stands for a digit that is unique to each set.
• Make sure that DHCP is enabled for the network
setting on your compatible device.
4
Start the Internet browser on your compatible device
and type “http://192.168.1.12/” into the URL address
field and display the page.
This system’s setup window is displayed.
≥ Examples of Internet browsers
iOS device/Mac : Safari
Android device : Google Chrome™
PC : Windows Internet Explorer
5
Select “Search wireless network”.
6
Select and input the details.
• Check your home wireless network name (Network
name (SSID)) and password for this network. This can
often be found on the wireless network router itself.
7
Select “JOIN” to apply the settings.
• In the pop-up screen, select “OK” to continue.
• Select “Cancel” to return to the setup window.
8
The settings are completed when “Success” is
displayed.
“ ” is indicated on the display.
9
Make sure to connect your compatible device back to
your home wireless network.
*1: If you have set your wireless network to be invisible, select
“BACK” and refer to “Alternative settings”. (> right)
• The below settings are the alternative or additional settings
for “Method 4”. (> left)
• Enable Java and Cookies in your browser settings.
Method 4
Setting the network connection from an Internet browser.
[1] Select your home wireless network
name.* 1
[2] Type the password.
If “Fail” is displayed press [OK], check the wireless network
password and other settings and start again from step 1.
Advanced network settings
Alternative settings
Instead of steps 5 and 6
Select “Manual settings”.
1 Type your home wireless network name into the
“Network name (SSID)” field.
2 Select the encryption method from the “Security
system” drop down list.
3 Type the password into the “Password” field and
then select “JOIN”.
Additional settings
If your home wireless network has been configured to use
specific IP Addresses, Subnet Mask, Default Gateway,
Primary DNS, etc.
Before step 7
Select “Advanced network settings”.
{. Input the required addresses into each field and select “JOIN”.
• To change the settings back to DHCP, select “ON” from
the “DHCP” drop down list.
If you want to change the name of this system that is
displayed as the AirPlay speakers or DLNA renderer.
Before step 5
Select “Additional settings”.
1 Select “Edit STEREO SYSTEM name”.
2 Type a new name into the
“STEREO SYSTEM name” field.
{. Only ASCII characters can be used.
3 Select “OK”.
4 If this system is already connected to your home
wireless network:
– Select “Additional settings”, and then select “Exit”.
If this system is not connected to your home
wireless network:
j Continue to step 5 of “Method 4”.
SC-PMX9PP-VQT5J68_mst.book 9 ページ ２０１４年３月４日 火曜日 午前１１時１３分