Panasonic SC-MAX670 - Manual (Page 12)

VQ
T5
F
3
5
12
The sleep timer switches off the system after the set
time.
Press [SLEEP] to select the setting (in minutes).
To cancel, select “OFF”.
Note:
• The sleep timer always comes first. Be sure not to set an
overlap of timers.
Sound and illumination
You can adjust the sound effect.
1 Press [SOUND] to select the sound effect.
2 Press [ 2, 1] to select the desired setting.
Preset EQ
Press [PRESET EQ] to select desired preset.
Using the main unit
You can adjust certain sound effect using the controls on
the main unit.
1 Press the button to select the sound effect.
2 Turn [MULTI CONTROL] to select the desired
setting.
By main unit only
You can change the illumination pattern or color on this
system.
Turn [ILLUMINATION] to select pattern or color.
Note:
To ensure the illumination effects are shown properly, make
sure to arrange the speakers accordingly as in “Placement of
speakers”.
Sleep timer
30 MIN > 60 MIN > 90 MIN > 120 MIN > OFF
^=================n
Adjust the sound effect
• BASS/MID/TREBLE
-4 to +4
• SURROUND
“ON SURROUND” or “OFF SURROUND”
• INPUT LEVEL
(For AUX IN 2)
“NORMAL” or “HIGH”
Note:
Select “NORMAL” if the sound is distorted during
“HIGH” input level.
• SUPER WOOFER
“SW1”, “SW2”, “SW3” or “OFF”
• D.BASS
“D.BASS ON”, “D.BASS BEAT” or “D.BASS OFF”
Note:
D.BASS BEAT: This function emphasizes the
attack level of the drum beat and produces a
punchy sound.
• Depending on the type of a track, the effect may
be small.
• PRESET EQ
Press [PRESET EQ]
• BASS/MID/TREBLE
Press [MANUAL EQ]
• D.BASS
Press [D.BASS,-SUPER WOOFER]
• SUPER WOOFER
Press and hold [D.BASS,-SUPER WOOFER]
Illumination effects
• PATTERN
Illuminate with pattern in multiple colors.
• COLOR
Illuminate in one color.
• OFF
SC-MAX670P_eng.book 12 ページ ２０１４年２月２６日 水曜日 午後５時４９分