Panasonic SC-MAX670 - Manual (Page 14)

VQ
T5
F
3
5
14
Using a microphone
Preparation
Decrease the volume of the system to its minimum
before you connect or disconnect a microphone.
1 Connect a microphone (not supplied) to the
microphone jack.
Plug type:
‰ 6.3 mm (1/4z) monaural
2 Turn [MIC VOL, MIN/MAX] on the main unit to
adjust the volume of the microphone.
3 If you want to sing with the background music.
Play the music source and adjust the volume of
the system.
Note:
• If a strange noise (howling) is emitted, move the
microphone away from the speakers, or decrease the
volume of the microphone.
• When you do not use the microphone, disconnect it from
the microphone jack, and decrease the volume of the
microphone level to “MIN”.
Using the auxiliary input
Preparation
• Disconnect the AC power supply cord.
• Switch off all equipment and read the appropriate
operating instructions.
Note:
Components and cables are sold separately.
You can play music from a portable audio equipment.
Preparation
Switch off the equalizer (if any) of the portable audio
equipment to prevent sound distortion.
Decrease the volume of the system and the portable
audio equipment before you connect or disconnect the
portable audio equipment.
1 Connect the portable audio equipment to
AUX IN 2.
Plug type:
‰ 3.5 mm (1/8z) stereo (not supplied)
2 Press [RADIO/EXT-IN] to select “AUX 2”.
3 Play the portable audio equipment.
You can connect a VCR, DVD player etc. and listen to
the audio through this system.
1 Connect the external equipment.
2 Press [RADIO/EXT-IN] to select “AUX 1”.
3 Play the external equipment.
Note:
• If you want to connect equipment other than those
described, refer to the audio dealer.
• Sound distortion can occur when you use an adapter.
To connect a portable audio equipment etc.
To connect a VCR, DVD player etc.
DVD player (not supplied)
Audio cable
(not supplied)
Rear panel of this main unit
SC-MAX670P_eng.book 14 ページ ２０１４年２月２６日 水曜日 午後５時４９分