Panasonic SC-MAX670 User Manual
Page 7
7
VQ
T5
F
3
5
ENGL
IS
H
1 Standby/on switch [
Н], [Н/I]
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power.
2 Numeric buttons
To select a 2-digit number
Example: 16: [
S10]
>
[1]
>
[6]
3 Delete a programmed track
4 Select audio source
5 Basic playback control
6 View content information
7 Select the sound effects
8 Set the play menu item
9 Automatically switch off function switches off the
system if you do not use the system for 20 minutes.
(Except radio)
: Set the play timer
; Set the clock and timer
< Set the sleep timer
= Set the program function
> Adjust the volume of the system
? Mute the sound of the system
To cancel, press the button again.
“MUTE” is also canceled when you adjust the volume
or when you switch off the system.
@ Decrease the brightness of the display panel and
turn off the DJ function buttons and illumination, etc.
A Select and enter buttons
B DJ function direct buttons
Press [DJ JUKEBOX], [DJ SAMPLER] or
[DJ EFFECT] to switch on the DJ function.
Press [1] to [6] on main unit to select the desired
function.
To cancel, press the selected [1] to [6] again.
C Switch on the DJ function
To cancel, press the button again.
D Turntable for DJ and multi control
E Browse tracks or albums
Turn [MULTI CONTROL] to browse the track.
Press [
1/;] to start playback from the selection.
Press [ALBUM/TRACK] to select album or track and
then turn [MULTI CONTROL] to browse.
Press [
1/;] to start playback from the selection.
F Open or close the disc tray
G Remote control sensor
Distance: Within approximately 7 m (23 ft)
Angle: Approximately 20° up and down, 30° left and
right
H Display panel
I
USB port (
)
USB status indicator
J
USB port (
)
USB status indicator
K Select the illumination effect
L AUX IN 2 terminal
M Microphone jack
N Adjust the volume of the microphone
O NFC touch area
P Disc tray
SC-MAX670P_eng.book 7 ページ ２０１４年２月２６日 水曜日 午後５時４９分