Panasonic SC-MAX670 - Manual (Page 9)

9
VQ
T5
F
3
5
ENGL
IS
H
USB
You can connect and play music tracks from your USB
device.
Preparation
Before you connect a USB device to the system, make
sure you do a backup of the data.
Do not use a USB extension cable. The system cannot
recognize USB device connected through a cable.
Decrease the volume and connect the USB device to
the USB port.
Hold the main unit when connecting or disconnecting the
USB device.
Note:
USB status indicator lights up when selected.
1 Press [USB] to select “USB B” or “USB A”.
2 Press [ 1/;] to start playback.
For other operations, refer to “Disc”.
You can view the available information on the display
panel.
Press [DISPLAY].
Radio
1 Press [RADIO/EXT-IN] to select “FM”.
2 Press [ 6] or [5] to select the frequency of
the required station.
To tune automatically, press and hold the button until
the frequency starts changing quickly.
“STEREO” is shown when a stereo broadcast is
being received.
Using the main unit
1 Press [RADIO/EXT-IN] to select “FM”.
2 Press [TUNE MODE] to select “MANUAL”.
3 Press [ :/6] or [5/9] to select the
frequency of the required station.
In situations where the station's signal is weak, sound quality
may be improved by manually selecting Mono reception.
1 Press [PLAY MENU] to select “FM MODE”.
2 Press [ 2, 1] to select “MONO” and then press [OK].
To cancel, select “STEREO”.
“MONO” is also canceled when you change the
frequency.
30 FM stations can be preset.
1 Press [OK] to select “LOWEST” or “CURRENT”
frequency.
2 Press [PLAY MENU] to select “A.PRESET” and
then press [OK].
“START?” is shown.
3 Press [OK] to start presetting.
To cancel, press [
∫].
1 Press [ 6] or [5] to tune in to the station.
2 Press [PROGRAM].
3 Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
Press the numeric buttons, [ :] or [9] to select
the preset station.
Using the main unit
1 Press [TUNE MODE] to select “PRESET”.
2 Press [ :/6] or [5/9] to select the preset
station.
Connecting a USB device
ILLUMINATION
A
B
USB device
(not supplied)
USB status indicator
Playback
• Stop playback
Press [ ∫]. “RESUME” is shown.
Press [ 1/;] to continue playback.
OR
Press [
∫] two times to stop the playback fully.
Viewing available information
Manual tuning
Improving the sound quality
Memory presetting
Automatic presetting
Manual presetting
Selecting a preset station
SC-MAX670P_eng.book 9 ページ ２０１４年２月２６日 水曜日 午後５時４９分