Panasonic SC-NJ03 - Manual (Page 2)

Receiving a call hands-free
If receiving a call on the mobile phone connected to this unit with
Bluetooth
® , you can make a hands-free call through this unit.
(If the mobile phone is compatible with HFP (profile).
Preparation
Connect this unit and the mobile phone with Bluetooth
® .
∫ Receiving a call
Press [ ] when this unit rings.
• When receiving the call, the Bluetooth ® indicator (blue) on the unit blinks.
• Talk into the microphone on this unit.
∫ Ending the call
Press [ ].
Note
• Adjust the volume during a call with volume knob on this unit.
• When the mobile phone and the unit are connected with Bluetooth
® , even if you receive a call and have a conversation on the
mobile phone, the unit may also output the incoming voice. To switch from a hands-free call using the unit to a call using only
the mobile phone, operate the mobile phone.
• If a call is received during audio playback using a Bluetooth ® connection, the sound will automatically switch to
the ringtone.
If a call is received while the AUX IN jack is in use, the sound will switch to the ringtone of the mobile phone
connected with Bluetooth
® .
• If you touch other devices to the NFC touch area of this unit when receiving a call, Bluetooth ® connection will not switch.
• To mute the ringtone, turn the volume knob of the unit to [- VOL] until no sound can be heard.
• Some apps for the mobile phone may not be available for hands-free.
• When the hands-free function is not available, set up a hands-free connection from the mobile phone to this unit.
• In a place with poor mobile phone reception, it may be harder to have a conversation. Use the mobile phone in a
place with good reception.
• In a place where voices echo considerably, such as an area near a wall, it may be harder to have a conversation.
Before using the unit, move it away from the wall or lower its volume.
• Hands-free function with a mobile phone may not work when you are playing back an audio of other device with a
Bluetooth ® connection.
Using the AUX input
You can listen to audio via the AUX IN jack when this unit is connected to a
device with an audio cable (commercially-available).
Note
• When the AUX IN jack is in use, the jack takes priority over the Bluetooth ® function or the NFC function.
(When a call is received on a unit connected by Bluetooth ® , the audio will automatically switch to ringtone of the
connected Bluetooth ® unit. After the call, the audio will switch back to the AUX input terminal. )
• The setting of the Bluetooth ® is not changed even if the audio cable (commercially-available) is inserted into AUX
IN jack.
• When using the AUX input, the volume may seem low depending on the connected device. In that case, check if
the volume limit can be changed on the device. For details, refer to the manual of the device.
• The playback of Bluetooth ® device stops.
• When the AUX IN jack is in use and an audio playback of a Bluetooth ® device starts, noise may occur.
About the DC OUT terminal
The DC OUT terminal of this unit is for supplying power to a connected
device (rated value: 5 V/1 A). Note that the port cannot be used for
purposes other than supplying power.
Note that when the unit is turned off, charging is not possible.
When this unit is connected with DC cable, power cannot be supplied to a
connected device.
Preparation
Turn on the unit.
1 Using a USB cable, connect the unit and a connected device.
•During connecting, the battery indicator (red) of this unit lights.
2 Once fully charged, remove the USB cable from the DC OUT terminal.
Note
• A cable compatible with your device is required. If a cable is supplied with your device, use the cable. A USB
cable may make the battery indicator (red) light even though you connect the cable only to this unit without a
connection to the device.
• Even if you connect a cable compatible with the DC OUT terminal of this unit, your device may not be charged. In
that case, use a charger supplied with your device.
• Depending on your device, charging methods other than the specified one may not be allowed. Check the
operating instructions of your device before use.
• Do not connect a device with a rated value higher than 5 V/1 A to this unit. Doing so may cause malfunction.
• To check if charging is complete, look at the screen of the connected device, etc.
• Audio cannot be played back while this unit supplies a connected device with power.
• If the battery level is low during use, the battery indicator (red) blinks. (
> 2)
To return to the factory preset state
Perform the following when you want to delete pairing device information, etc.
Preparation
Turn off the unit.
Press and hold [ Í/I] for 10 seconds until battery indicator (red) and Bluetooth ®
indicator (blue) blink.
The pairing device information will be deleted by the reset, so it will be necessary to perform
pairing again. Delete the pairing information for this unit from the Bluetooth
® device, then
perform the pairing operation again.
Troubleshooting
Before requesting service, make the following checks. If you are in doubt about some of the
check points, or if the solutions indicated in the following guide do not solve the problem, refer
to “Customer Services Directory (United States and Puerto Rico)”.
Sound from the device is cut off.
• Simultaneous use with microwaves may result in connection interruptions.
• Simultaneous use with other 2.4 GHz devices, such as cordless telephones, etc., may result in
connection interruptions. Increase the distance between this system and these devices.
• Do not place the unit in a place where radio waves will be blocked, such as a metal cabinet.
• The device is out of the 10 m (33 ft.) communication range. Move the device nearer to this
unit. (See “About Bluetooth ® ”)
• Remove any obstacle between this unit and the device.
• Switch off any wireless LAN device.
• When a PC and the unit are connected with Bluetooth®, check the sound output destination setting of the
PC.
• If the sound skips or is not output correctly in other ways, perform “To return to the factory preset
state”, and register the unit to the Bluetooth ® device again.
• Depending on the device connected to the unit, sound may be cut off or noise may be
produced. When this happens, lower the volume of the device.
The battery indicator (red) blinks during charging.
• It is recommended to charge the battery in the temperature of between 10
oC and 35 oC
( i50 o F and i95 o F). The battery indicator (red) may flash and charging may not be
possible when it is out of recommended temperature range.
• The battery may not charge when the temperature surrounding the battery is high during the
operation or right after the operation even when it is within the recommended temperature
range. In such case, stop the usage and let it cool down.
The volume does not increase.
• Check the volume of the unit or the Bluetooth
® device.
The device cannot be connected.
• Refer to the operating instructions of the device, and perform the pairing operation again.
(See “Pairing with Bluetooth ® device”)
• Make sure that this unit is not connected to a different device.
• The registration information of the unit may have been deleted from the Bluetooth
® device.
Register the unit again.
• Delete the registration information of the unit through the Bluetooth ® menu, etc. on the
Bluetooth ® device first, and try to register the device again.
The device is connected but audio cannot be heard from this unit.
• For some built-in Bluetooth
® devices, you have to set the audio output to “SC-NJ03/NJ40”
manually. Read the operating instructions of the device for details.
This unit is not operating correctly. For example, this unit turns off all of a sudden or all indicators blink.
• Press [RESET] by inserting a straightened clip, etc. The registration information of the
Bluetooth ® devices will not be deleted. (See “Control reference guide”)
The One-Touch Connection (NFC feature) is not working.
• Turn on the NFC feature of the device.
Volume is low when this unit is connected to a TV via Bluetooth ® .
• Adjust the volume on the TV. The volume of headphone output may be coupled with the volume of the
Bluetooth ® output depending on the TV. In such case, adjust the volume of the headphone output on the TV.
Maintenance
Turn off the power of this unit and wipe with dry soft cloth. Disconnect the DC cable when the DC cable is used.
• When it gets very dirty, wipe off dirt with a cloth immersed in water and wrung strongly, and then wipe with dry soft cloth.
• Solvents such as benzine, thinner, alcohol, oil, detergents, etc., may cause the external case to be altered or the
coating may come off, so do not use them.
• Before using chemically treated cloth, read the instructions that came with the cloth carefully.
-If you see this symbol-
About Bluetooth ®
Frequency band used
This unit uses the 2.4 GHz frequency band.
Certification of this device
• This unit conforms to frequency restrictions and has received certification based on frequency laws. Thus, a
wireless permit is not necessary. • The actions below are punishable by law in some countries:
– Taking apart/modifying the unit.
– Removing specification indications.
Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
® equipped devices is not guaranteed.
• All devices must conform to standards set by Bluetooth SIG, Inc.
• Depending on the specifications and settings of a device, it may fail to connect or some operations may be
different.
• This system supports Bluetooth ® security features. But depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth ® device.
Range of use
Use this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the environment, obstacles or interference.
Interference from other devices
• This unit may not function properly and troubles such as noise and sound jumps may arise due to radio wave
interference if this unit is located too close to other Bluetooth ® devices or the devices that use the 2.4 GHz band. • This unit may not function properly if radio waves from a nearby broadcasting station, etc. is too strong.
Intended usage
• This unit is for normal, general use only.
• Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference
(example: airports, hospitals, laboratories, etc).
Specifications
To remove the battery when
disposing of this unit
• Use up the battery before disassembling. (For Cautions of the battery)
• Keep the screws out of reach of children to prevent swallowing.
∫ How to disassemble the SC-NJ03
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Products Limited Warranty
Limited Warranty Coverage
(For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North
America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the
date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b)
replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair,
replace or refund will be made by the warrantor.
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no
charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic
parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This
warranty is extended only to the original purchaser of a new product which was not sold “as is”.
Mail-In Service--Online Repair Request
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at www.panasonic.com/repair.
When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, and send it prepaid,
adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at
www.panasonic.com/BatteryHandling as Panasonic is committed to providing the most up to date information.
Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered
receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER
WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear
and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures
which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use
such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory
Service Center or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images,
data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an
implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem
with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem
is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the
warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
As of November 2013 To the connected device
USB cable (accessory of connected device)
Side view
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or
dealer and ask for the correct method of disposal.
Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission.
Amplifier section
RMS Output Power (Battery):
10 % total harmonic distortion : 2 W (1 kHz, 4 ≠)
FTC Output Power (Battery):
1.0 % total harmonic distortion : 1.5 W (150 Hz-10 kHz, 4 ≠)
Terminals section
DC IN (USB-Micro B):
5 V 500 mA
AUX input:
Stereo ‡ 3.5 mm ( 1 / 8 q) jack
DC OUT (USB-A):
5 V 1 A (Supply output only power-on)
Speaker section
Type:
1 way 1 speaker system (Bass reflex type, Mono)
Unit(s):
‡40 mm k 1 (1 9 / 16 q k 1)
Impedance:
4 ≠
Bluetooth ® section
Bluetooth ® system specification:
Ver. 3.0
Wireless equipment classification:
Class 2 (2.5 mW)
Supported profiles:
A2DP (SCMS-T compatible)/AVRCP/HFP
Supported codec:
SBC
Frequency band:
2.4 GHz band FH-SS
Operating distance:
Approx. 10 m (33 ft.) Line of sight
Mesurement enviroment: Height 1.0 m (3.3 ft.)
Microphone section
Type:
Mono
General
Power supply:
Internal Battery: 3.6 V (Li-ion: 2200 mAh)
Battery Life in Use (Bluetooth ® ):
Approx. 18.5 h*
Charging Time (Power-off):
Approx. 6 h
Rechargeable times
About 500 times
Dimensions (W k H k D):
50.2 mm k 122 mm k 23.2 mm
( 1 31 / 32 q k 4 13 / 16 q k 29 / 32 q )
Mass (Weight):
Approx. 118 g (0.26 lbs)
Operating temperature range:
0 o C to i 40 o C ( i 32 o F to i 104 o F )
Charge temperature range:
10 o C to i 35 o C ( i 50 o F to i 95 o F )
Operating humidity range:
35% to 80% RH (no condensation) Note
• Specifications are subject to change without notice.
• Mass and dimensions are approximate.
* By the measurement method prescribed in the provisions.
The following instructions are not intended for repairing purposes but for the
disposal of this unit. This unit is not restorable once disassembled.
When disposing of this unit, take out the battery installed in this unit and recycle it.
3
2
1
4
 

 

• Insulate the A with cellophane tape or similar.
• Do not disassemble the battery.
Product or Part Name Parts Labor
Portable Wireless Speaker System 1 Year 1 Year
All included Accessories
(Except Non-Rechargeable Batteries) 90 Days Not Applicable
Only Non-Rechargeable Batteries 10 Days Not Applicable
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and
Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/support
or, contact us via the web at:
http://www.panasonic.com/contactinfo
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Owner’s Manual online for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
[email protected]
You may also contact us directly at:
1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
The model number and serial number of this product can be found on either the
back or the bottom of the unit.
Please note them in the space provided below and keep for future reference.
MODEL NUMBER SC-NJ03
SERIAL NUMBER
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
USA Only: Disposal may be regulated in your community due to
environmental considerations. For disposal or recycling
information, please visit Panasonic website:
http://www.panasonic.com/environmental/
or call 1-888-769-0149.
6 7 8 5
SC-NJ03_P.fm 2 ページ ２０１４年２月２１日 金曜日 午後５時１１分