Auerswald 2500 - Manual (Page 112)

Use of the Telephone and PBX System
Forward the Connection (MSN/DDI Call Forwarding)
112
Assign Key:
Use Function via Key:
By pressing the key the MSN/DDI Call Forwarding is switched on, off or over to the configured
target.
Exception: A key assigned with “deactivate all” deletes only the currently switched on Call
Forwardings.
Open the key programming menu for the func-
tion “Call forwarding: MSN/DDI” (You will find
help on
page 33 and the following).
define keys
function key ...
... level
MSN/DDI CF
Use the and softkeys to browse to the
option you require and press the softkey to
the left of the option:
ț deactivate all: Assign the key with the func-
tion “deactivate all”.
(no additional entry is necessary)
ț unconditional: Assign the key with the func-
tion “MSN/DDI Call Forwarding uncondi-
tional”.
ț on busy: Assign the key with the function
“MSN/DDI Call Forwarding on busy”.
ț on no reply: Assign the key with the function
“MSN/DDI Call Forwarding on no reply”.
...
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on
page 155 and the following):
ț [telephone number]: Allows to enter a tar-
get telephone number.
ț [name]: Allows to enter a name for the tar-
get.
ț [switching type]: Enables the assignment
with switch on, off or over.
ț [no. to redirect]: Allows to enter an external
telephone number of the PBX (without
exchange line access number).
Press the softkey to complete the settings.