Auerswald 2500 - Manual (Page 116)

Use of the Telephone and PBX System
Door and Relay Functions of the PBX
116
Assign Key:
Use Function via Key:
General assigned key (only during the idle state of the telephone): By pressing the key the
function menu for “door functions” (s. a.) opens.
Defined assigned key: By pressing the key the voice connection with the door is established
(after picking up the receiver) or the door opener and/or the light is switched on.
LED Signalling next to the Key:
The function “light on” switches the 3rd relay of the corresponding door terminal separately
on during the period configured in the PBX.
Switch Relay internally
If the PBX is equipped with one or more relays and if these are configured as universal relays
(see manual of your PBX), they will be switched on and off by this function.
Open the key programming menu for the func-
tion “door function” (You will find help on
page 33 and the following).
define keys
function key ...
... level
door function
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on
page 155 and the following):
ț [general/defined]: Switches between gen-
eral and defined assignment.
ț [telephone number]: Allows to select a door
by its name/number.
ț [name]: Allows to enter a new name for the
door.
ț [door function]: Enables the assignment
with open the door and/or switch on the light
as well as door conversation.
Press the softkey to complete the settings.
green The door opener is switched on.
red There is a voice connection with the door terminal.
yellow The light is switched on.
off No function assigned to the key, is switched on.
☞
Advice