Auerswald 2500 - Manual (Page 148)

Use of the Telephone and PBX System
Waiting Field
148
Assign a Key with the Function “Waiting Field Reception”:
Use the Function “waiting field reception” via Key:
By pressing the key in the idle state of the telephone the function is switched on, off or over.
LED Signalling next to the Key “Waiting Field Reception”:
The deactivation of a Waiting Field Reception is only possible if there is no caller in the Wait-
ing Field. If there are several Waiting Field Receptions this restriction applies only if one
remaining Waiting Field Reception is active.
As long as the Waiting Field reception is activated, calls/conversations are not entered into
the caller/calls/redialling list.
After the activation of the Waiting Field reception existing Subscriber Call Forwardings con-
figured for this telephone, parallel calls as well as Do-no-Disturb are switched off. After the
deactivation of the Waiting Field reception (on the telephone) these functions (e.g. a Call For-
warding to the answering machine) are possible again. The corresponding function (except
parallel call) has to be activated again.
COMpact 5020 VoIP and COMmander Basic.2/Business: When switching off the Waiting
Field reception the subscriber is automatically logged out inbound and when switching on it
will be automatically logged in again.
COMpact 4406 DSL, COMpact 4410 USB and COMmander Basic: When activating the Wait-
ing Field reception this subscriber will automatically be logged out of all groups . After the
deactivation you have to log the subscriber in again - if necessary.
Open the key programming menu for the func-
tion “waiting field reception” (You will find help
on
page 33 and the following).
define keys
function key ...
... level
w.fld.reception
The current settings for the key
assignment is shown on the
display.
If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on
page 155 and the following):
ț [switching type]: Allows the assignment
with switch on, off or over.
Press the softkey to complete the settings.
green The Waiting Field Reception is switched on.
off The Waiting Field Reception is switched off.
☞
Important