First use of the telephone, Connection of the receiver, Pic. 1 : connection of the receiver – Auerswald 2500 User Manual

Page 15: Connection to the pbx, Pic. 1: connection of the receiver

Advertising
background image

Introduction

First Use of the Telephone

15

First Use of the Telephone

COMfortel 2500: If you like to connect the key expansion module COMfortel Xtension30, read
the

chapter

Connection and Mounting of the Key Extension COMfortel Xtension30 (COMfor-

tel 2500)

on page 17

first.

For commissioning of the system telephone, the Auerswald PBX must be connected to the
230-V mains supply.

To be able to use the here described scope of functions completely, the system telephone
and the PBX need the following firmware versions:
3.3 A or higher (system telephone)
1.5 C or higher (COMmander Business and COMmander Basic.2)
2.0 A or higher (COMpact 5010 VoIP and COMpact 5020 VoIP)
2.0 E or higher (COMpact 2204 USB
, COMpact 2206 USB, COMpact 4406 DSL, COMpact
4410 USB and COMmander Basic).
The versions can be reviewed via system telephone (see

chapter

View Information on Tele-

phone and PBX

on page 185

). If you have devices with an older version, please update the

corresponding devices.

Connection of the Receiver

Connect the receiver as follows:

1.

Insert the plug at the longer
straight end of the spiral cord
into the jack marked with the

on the bottom side of the

telephone and lead the cable
via one of the cable channels to
the outside (

Pic. 1

).

2.

Put the other end of the spiral
cord into the jack of the
receiver.

Connection to the PBX

Connect the telephone to the PBX as follows:

1.

Put one plug of the enclosed ISDN cable into the jack marked with

on the bottom

side of the telephone and lead the cable via one of the available cable channels to the
outside (

Pic. 2 on page 16

).

2.

Put the other jack of the ISDN cable into an ISDN wall jack connected to the PBX system.
The system telephone can be operated on an internal S

0

port as well as on an U

P0

port

of the PBX. For each U

P0

port only one telephone can be connected (see also manual of

the PBX).

Advice

Pic. 1: Connection of the Receiver

Advertising