Pic. 31 : plug in the usb cable, Pic. 31: plug in the usb cable – Auerswald 2500 User Manual
Page 176
PC Connection and Installation of the Software
Make a Connection between Telephone/PBX and PC
176
Connection to the USB Interface of a PC (COMfortel 2500 only)
Connect the PC to the USB interface of the system telephone as follows:
1.
Open the plastic cover on the back of your system telephone that is closer to the receiver.
2.
Plug in the flat plug of the delivered cable into a USB jack of the PC and the other plug
into the USB jack on the back of the system telephone (see
The length of the USB cable must not exceed 3 m (such as the enclosed cable).
If you have connected the system telephone to your PC via the USB interface, the New Hard-
ware assistant will automatically be started under Windows 98 SE, Windows Me, Windows
2000 and Windows XP to support you with the installation of the necessary driver (see
ter Installation of the Drivers and the PC Software on page 177
). This will search for the most
suitable driver for the device, insert the CD (Auerswald Mega Disk) into the CD ROM drive
and enter the directory “<CD drive>\driver\” as target.
☞
Important
☞
Advice
Pic. 31: Plug in the USB cable
USB jack of the PC
USB jack on the back
of the telephone