Comfortel set and comfortel melody, Configure telephone with comfortel set, Comfortel set an – Auerswald 2500 User Manual

Page 178: Configure telephone with co

Advertising
background image

PC Connection and Installation of the Software

COMfortel Set and COMfortel Melody

178

4.

Follow the instructions on the monitor by repeatedly pressing the button “Continue” and
select the corresponding telephone.

5.

Follow the instructions on the monitor and select the PC programmes and drivers to be
installed

45

.

COMfortel Set and COMfortel Melody

The configurations of the system telephone can comfortably be made via the configuration
programme COMfortel Set. This refers to the settings that are possible on the telephone itself
as well as additional settings such as currency name, cost per unit and the project list.

With the programme COMfortel Melody you can create your own ringer melodies for your tel-
ephone.

Minimal Requirements for the PC for COMfortel Set and COMfortel Melody

PC with Intel Pentium 500 MHz or compatible processor

Windows 2000 (Service Pack 4 or better) or Windows XP (Service Pack 2 or better)

RAM memory: 64 MB, recommended 128 MB;
for Windows XP: 128 MB, recommended 256 MB

Harddisk memory used by the PC programme after the installation for
COMfortel Set: 5 MB, for COMfortel Melody: 4 MB
+ 44 MB for the one-time installation of Java Runtime

USB interface (if used) according to USB specification 1.1 or 2.0

CD ROM drive

Mouse or compatible pointer device

SVGA graphic controller with a resolution of 800 x 600;
recommended 1024 x 768 and 65536 colours (16 Bit)

Configure Telephone with COMfortel Set

Configure as follows:

1.

Start the programme.

2.

Select the interface “USB”, “IP network”, “ISDN controller CAPI 2.0” or “V.24” (with help
of the V.24-COM-Port of the PC; e.g. COM 1, COM 2) under “Options

̈

interface” in

the menu. If you select “IP network”, the IP address of the PBX as well as the configura-
tion port for system telephones has to be entered.

3.

Via the button “new” you can create a file for the new settings of the configuration. It is
necessary to set the telephone to be configured as well as the PBX correctly.
or
If you have already stored a configuration on your PC, you can open it by pressing the
button “open” and selecting from “file”.

45

Only COMfortel 2500.

Advertising