Auerswald 2500 - Manual (Page 182)

Service Functions
Synchronization with the PBX
182
Distribute Firmware
If you have made the firmware update manually, you can distribute this new firmware version
from the same telephone to all the other system telephones connected to the PBX and iden-
tically constructed. You can select “immediately” (if the telephones are not busy) or “within
def. time frame” (configured time in the PBX) for the time of execution.
On the display of the distributing system telephone “Server Mode” is shown during the dis-
tribution process. In this time an operation is not possible.
If different system telephones (COMfortel 1500 and COMfortel 2500) are connected to the
PBX, the manual firmware update has to be done on a COMfortel 1500 and on a COMfortel
2500. Then the distribution of the firmware can be started from both telephones. If there are
older system telephones (COMfort 1000, COMfort 1200 and COMfort 2000 plus), an addi-
tional manual firmware update will be necessary for them, too.
Synchronization with the PBX
If necessary, a complete data synchronization with the PBX can be started.
Open the settings menu for “distribute
firmware” (you find help on
page 33 and the
following).
settings
synchronization
distr. firmware
The firmware update is made.
Afterwards is displayed if the
update was successful.
Press the softkey to confirm the message.
☞
Advice
Open the settings menu for “synchronization
with PBX” (you find help on
page 33 and the
following).
settings
synchronization
sync.with PBX