Auerswald 2500 User Manual
Page 49
Make a Call
Inbound Call
49
If you press the
softkey after entering the internal telephone number, the handsfree oper-
ation function is started too.
If you like to take calls directed to another group, dial the Pickup for the group telephone
number.
If there is a name to the internal telephone number, it will be displayed as soon as this tele-
phone number has completely been entered.
You can assign an internal subscriber/group number to a freely programmable function key
(speed dialling key; see
). A red flashing LED signals a call to this number and you
can pickup that call by pressing the key and accepting it. You can also configure a pickup key
(see
). After pressing this key, you have to select a telephone as described here.
This way you can also start a call take-over from telephones or answering machines where
this is permitted (see manual of the PBX).
COMpact 5010/5020 VoIP and COMmander Basic.2/Business: Depending on the authoriza-
tion assigned to your telephone, you can do a Pickup for any available telephones, for tele-
phones within a group or you cannot do it at all.
Your own Telephone rings (Door Call) – Accept the Call and open the Door
You will be able to programme the door terminal communication, the door opener and light
switching for a certain door on a freely programmable function key (see
). This way
you can also use the door functions without a call to your telephone.
☞
Advice
You get a Door Call.
A
Pick up the receiver.
or
Press the hook key to start handsfree opera-
tion (see also
open door
/
light
Press the
softkey to open the door. (If the
third door relays is used for switching the stair-
case light, it will be also switched on.)
☞
Advice