Auerswald 2500 - Manual (Page 73)

Make a Call
In a Conference
73
In a Conference
In a conference call you talk to two subscribers at the same time. By pressing the softkey
you can switch over from one subscriber to the other. The functions available in the bottom
display for only one of both subscribers, always refer to the subscriber marked with in front
of the name or the telephone number.
Connect both Call Partners: If you like to leave your initiated conference and if your call
partners have to continue their conversation, you will be able to transfer them.
Finish the Conversation with one of the Call Partners: If you finish a conference and like
to continue talking with one of the call partners later on, you will be able to terminate the con-
versation with the other partner. Of course one of your call partners is able to simply hang up
so that you continue to talk with the other one exclusively.
Alternation: If you finish a conference and like to continue talking to both call partners
separately, you can select one call partner to be put on hold.
Finish the Conversation completely: If you hang up during a conference which was initi-
ated by you, the conversation will be finished completely.
Your systems telephone will display the functions which are selectable during a conference
in the bottom line. With help of the and softkeys you are able to scroll through the dif-
ferent options. With the
softkey you will start the displayed function immediately.
Connect both Call Partners
☞
Advice
You have a conference.
Use the and softkeys to browse to option
conn.both calls.
conn.both calls
Press the softkey to connect both calls.
Both call partners are con-
nected.