Auerswald 2500 - Manual (Page 81)

Telephone Book and Lists
Telephone Book
81
interface of the PBX (internal telephone number with COMset, short-code dialling numbers
with COMtools).
Create a Call Macro
Please enter the external telephone number always with the exchange line access number
“0”. (Exceptions: Direct Exchange Line Telephone; see
page 56 .)
Press the telephone book key to switch from
the idle state to the telephone book.
new contact
Press the softkey to create a new contact.
N
name
Enter a name.
Press the softkey to complete your entry.
Use the and softkeys to browse to option
macro.
macro
Press the softkey to the left of the option
macro.
N
telephone number
Enter a telephone number.
Press the softkey to enter a control token.
Use the and softkeys to browse to the
option you require and press the softkey to
the left of the option:
ț pause 1 second: Insert a pause of one sec-
ond.
ț pause 2 seconds: Insert a pause of two
seconds.
ț pause 4 seconds: Insert a pause of four
seconds.
ț wait for connect: Insert a pause until a con-
nection has been established (if no connec-
tion is possible, the macro will be finished).
ț repl/lift handset: Finishes the connection or
establishes it depending on the status.
...
Insert additional digits and control characters.
(depending on the PBX up to 40).
Press the softkey to complete your entry.
[ ]
[ ]
☞
Important