Panasonic -eng - Manual (Page 50)

50
Cutting/copying and pasting waveforms
Drag the mouse across the waveform to select a section.
Click .
Drag the slider to the position you want to paste to.
Click .
The section changes color to show it
is selected.
The section you cut is pasted into the
position indicated by the slider.
The selected section is cut.
In step , if you click instead, the section is copied.
In step , if you click instead , the section is trimmed and the <Sound File Waveforms> screen shows that
section.
If you right click any part of the waveforms in the <Sound File Waveforms> screen, the shortcut menu will
appear.
You can drag the edges of the section to change its length.
Click and the section plays with the slider moving to show which part is playing so you can check the
section before proceeding.
You can also enter times in the Start point, End point, and Length boxes to specify the section.
If stereo WAVE format files are selected, left and right sound waveforms can be individually edited.
For example, to edit the left channel sound waveform, click on the right channel.
This button will go OFF and the right channel sound waveform will turn grey. You can now edit the left
channel sound waveform.
You cannot cut only one side of stereo sound waveforms.
When one side of the stereo sound waveforms turns grey, will change to . No sound will be then output
from the selected sound waveform.
You can paste one side of stereo sound waveforms on to the other.
For example, you can copy the left channel sound waveform and paste it on the right channel.
Editing with sound file waveforms
-1 -2