Panasonic -eng - Manual (Page 196)

Output mode
- 196 -
DVD-RAM output mode
Adjusting the encoder settings and activate VRWriter
Set the output settings such as the encoder format, etc.
and activate VRWriter.
1. Confirm the data to be output using .
The video will be displayed on the Preview screen.
2. In , specify the output destination and file
name.
• The output destination can be selected from the
folders ([MaterialFolder] is set by default) registered
in the library.
3. Set and .
• For each item, refer to the descriptions on the
input/output setting screen. ( @ 199 )
4. Click and confirm the forecast size, etc. of
file output.
The detailed information screen for output file will be
displayed.
After confirmation, click [Close] to close the screen.
• When still images being output have a long duration,
the accuracy of the estimated file size may be
degraded.
5. Click .
[Creating output file] is displayed in and data is
created in MPEG2 format. After that VRWriter is
activated.
For operation after VRWriter is activated, read
“Outputting to DVD-RAM disc”. ( @ 191 )
• The created MPEG2 file is also displayed in the
library as a video clip.
• Click [Stop] to cancel the output.
• When you wish to change the data to be output prior
to the output, return to the Edit mode and change the
data on the edit track.
Or, re-select the file on the library and then drag and
drop it on the control screen.