Custom Brackets Pan-Tilt Head CB - Manual

Tilt lock knob
(rotate counter-clockwise
to tighten)
Tilt drag knob
(rotate clockwise
to tighten)
P a n - T i l t H e a d C B I N S T R U C T I O N S
phone 440-446-0819
Toll Free 800-530-2289
website: www.custombrackets.com
email: [email protected]
32 Alpha Park
Cleveland, Ohio 44143
Made in USA
Attach the bracket to the quick release by pushing in the push bar, and while
holding the push bar in, slide the bracket into the quick release from the front.
Figure #2 shows the bracket in the quick release.
Attaching the bracket to the Pan-Tilt Head quick release
Pan-Tilt Head CB Features
Front View
Custom Brackets
style quick release
Innovative Camera Supports
Pan lock knob
(rotate counter-clockwise
to tighten)
Quick Release
push bar
Custom Brackets
style quick release
Figure #1 Figure #2
Attach the Pan-Tilt Head CB to the tripods’ ⅜”-16 mounting stud and tighten until firmly attached.
* * * * * Caution * * * * *
If you are using a tripod with a ¼”-20 mounting stud, you will need to purchase a ⅜” to ¼” reducer
bushing and install it in bottom of the Pan-Tilt Head’s base.
Attaching the Pan-Tilt Head CB to a tripod
Using the Pan lock knob for drag may cause damage to unit. To properly
use Pan lock knob, either have it fully tighened, or fully loosened.
For a period of five (5) years from date of purchase, Custom Brackets will repair or replace free of charge, any
defect in material or workmanship. Warranty does not cover repairs due to abuse, negligence, impact or any
modifications made by the customer. Excessive force unscrewing knobs will void warranty. Warranty service
is available by returning the Pan-Tilt Head CB (shipping prepaid) to Custom Brackets. All returns must include
a return authorization (RA) number (contact Custom Brackets to obtain), letter explaining the problem, and a
copy of the sales receipt.
USA 5 Year Warranty
Repair service is available by returning the Pan-Tilt Head CB (shipping prepaid) to Custom Brackets.
All returns must include a return authorization (RA) number (contact Custom Brackets to obtain), letter
explaining the problem, and a copy of the sales receipt. A repair cost will be issued and must be approved
prior to any repairs. Shipping charges are the responsibility of the customer.
Repair
The Pan-Tilt Head CB is designed completely maintenance-free.
Maintenance
For a period of five (5) years from date of purchase, Custom Brackets will repair or replace free of charge, any
defect in material or workmanship. Warranty does not cover repairs due to abuse, negligence, impact or any
modifications made by the customer. Excessive force unscrewing knobs will void warranty. Limitation to the
warranty - after year one shipping charges are not covered. Warranty service is available by returning the Pan-
Tilt Head CB (shipping prepaid) to Custom Brackets. All returns must include a return authorization (RA) number
(email [email protected] to obtain), letter explaining the problem, and a copy of the sales receipt.
International 5 Year Limited Warranty
The Pan-Tilt Head CB has many unique features. It is constructed from anodized aluminum for a lightweight
and scratch-resistent finish. The Pan-Tilt Head has separate lock and drag knobs for better control. All knobs
are captive to prevent loss. All of the fasteners are stainless steel to resist corrosion and black oxide for
appearance.
Pan-Tilt Head CB Features