kurtz ersa EASY ARM 2: Flexible & efficient EN - Manual

Detailbild + Bildunterschrift Detailbild + Bildunterschrift
Ersa solder fume extractions – silent and efficient as never before!
Ersa EASY ARM 1 and EASY ARM 2
Technical highlights:
 Efficient 3-stage particle- and gas filtering
 Super silent operation
 Independently adjustable suction power per arm
 Optical and acoustical filter exchange status
 Easy and fast filter exchange – without tools
 Identical filters for EASY ARM 1 and EASY ARM 2
 Interface to interact with i-CON soldering stations
Ersa solder fume extraction units are based on
over 15 years of experience in process air cleaning
by Ersa.
They stand out by a high suction power and an
efficient filter performance combined with su-
per silent operation. Exhaust volume per arm is
110 m³/h. Both the EASY ARM 1 and EASY ARM 2
are equipped with filters that clean the process
air in three stages: The pre-filter absorbs dust
and big particles. The combined filter separates
micro particles which occur during soldering and
absorbs dangerous gas molecules in the incorpo-
rated activated carbon filter.
The operator can choose between a system with
one exhaust arm – the EASY ARM 1 – and a unit
with two exhaust arms – the EASY ARM 2. Both
units can be mounted individually by means of
their table clamp. Exhaust power is set indepen-
dently for each extraction arm at the touch of a
button. The EASY ARM 1 and EASY ARM 2 use
an identical pre-filter and combined filter. Opti-
cal and acoustical signals inform the operator
when filters have to be exchanged. A wide range
of exhaust arms and nozzles for all applications
are available so that the user will find the proper
solution for his requirements.
For energy saving purposes and to extend filter
lifetime, both units can be connected with Ersa
i-CON soldering stations or a standby switch. In
this way, the extraction unit is only working whilst
the attached soldering station is in operation,
stopping as soon as the soldering station goes
into standby mode.
Clearly structured
control panel High-end filter materials,
same filters for EASY ARM 1 and EASY ARM 2 Efficient solder fume extraction
directly at the solder joint
Ersa solder fume extractions satisfy with high exhaust power and super silent operation!
Ersa EASY ARM 1
with exhaust arm
Omniflex and round
exhaust nozzle