Analog Devices BHD930-AG - Manual (Page 19)

BROAD SCAN (HD/SDI)
PAGE 19
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION
4-1. INTRODUCTION
The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the device.
• The CONTROL MODE allows selecting and adjusting the parameters of the device.
4-2. CONTROL BUTTONS
The front panel display is controlled by 2 buttons and 1 knob:
 knob: • In the CONTROL MODE, turn this knob to scroll thru the different menus.
ENTER button: • From the STATUS MODE, press this button to enter in the CONTROL MODE.
• From the CONTROL MODE, press this button to confirm a selected item.
EXIT / MENU button:
• From the STATUS MODE, press this button to enter in the CONTROL MODE.
• From the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE (press several times).
4-3. STATUS MODE
When switching ON, the front panel display shows the product's name and firmware versions as follows:
DEVICE MODEL
BHD930-AG
DEVICE STATUS
DEVICE VERSION
Version _._
Input : SVGA
c INPUT STATUS
H = 37.9K V= 60 Hz
d
Output : NTSC
e OUTPUT STATUS
Internal 59.94
f
c INPUT FORMAT
d HORIZONTAL FREQUENCY (in kHz) / VERTICAL FREQUENCY (in Hz).
e OUTPUT STANDARD.
f OUTPUT RATE TYPE / OUTPUT FREQUENCY