Analog Devices BHD930-AG - Manual (Page 31)

BROAD SCAN (HD/SDI) Chapter 6 : REMOTE CONTROL SOFTWARE (continued)
PAGE 31
6-3. COMMUNICATION SETUP (continued)
• CASE OF LAN PORT:
- With the front panel display menu of the device, verify the configuration of the LAN communication port
(CONTROL > LAN setup), then activate the LAN communication port (CONTROL > RS232/LAN port >
LAN).
- With the Controls menu of the software, select RS232/LAN setup and LAN Setup. Then configure the Local
port, the Remote IP address and the Remote port and click on Apply to setup the new values. The software will
also display Device connected.
6-4. USING THE SOFTWARE
c Click on the Input tab, and select the needed adjustments.