Avaya P333T-PWR - Manual (Page 30)

Device Manager
28 Quick Start for Hardware Installation: P333T-PWR Stackable Switch
● Sun Microsystems Java plug-in (supplied on the “Documentation and Utilities” CD). Refer
to the Release Notes for the exact version of the Java plug-in.
Configuring the Device Manager
You can configure several Device Manager parameters using the CLI. These parameters
include the time-out and retries parameters, the location of the Web server that provides the
help files for the Device Manager, and the Java plug-in required for running the Device
Manager.
Device Manager Commands
The following Device Manager commands are available.
Running the Device Manager
Note:
Note:
You should assign an inband or out-of-band interface IP address to the switch
before beginning this procedure.
In order to... Use the following command...
Set the SNMP retries parameter set snmp retries
Set the SNMP time-out parameter set snmp time-out
Set the location of the Web server
with the help files and the Java
plug-in set web aux-files-url
Display the SNMP retries parameter show snmp retries
Display the SNMP time-out
parameter show snmp time-out
Display the URL of the Web server
with the help files and the Java
plug-in show web aux-files-url