Vaddio WallVIEW CCU Z330 User Manual

View, Z330

Advertising
background image

Installation and User Guide



Camera and Electronic Products for Integrators

©2009 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and
pricing subject to change. Vaddio, WallVIEW, HSDS, Quick-Connect, EZIM, ProductionVIEW, PreVIEW, EZCamera and PowerRite are
registered trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number 341-906 Rev. A

W

ALL

VIEW™

CCU

Z330

WITH

HSDS™

Featuring the Quick-Connect™ CCU for the
Sony® BRC-Z330 PTZ Camera

OVERVIEW
The Vaddio WallVIEW CCU Z330 (Figure 1) is built for use with the
Sony BRC-Z330 high definition PTZ Camera. The WallVIEW CCU
Z330 allows the user to control the color output of the camera’s image
sensor, through both Red and Blue Gain knobs, Detail, as well as Iris
and Gain levels, to provide a higher quality image. In addition, there
are also Red, Green and Blue Enhance adjustments for added fine-
tuning of the cameras image. The system uses high speed
differential signaling (HSDS), an active transmission system that
delivers low-loss, high-quality video over CAT-5 cabling distances up
to 500 feet.
The WallVIEW CCU Z330 system is capable of high definition (HD) 1080i or 720p component video and has
a simultaneous SD composite video output in a variety of screen configurations. The BRC-Z330 is capable
of either NTSC or PAL formats.

INTENDED USE
Before installing the WallVIEW CCU Camera System, please read the entire manual thoroughly. All Vaddio
camera systems are designed for use indoors. Outdoor operation is not recommended, has not been tested,
and could damage the camera and/or create a potentially unsafe operating condition. Use only the Vaddio
PowerRite power supply provided.

SAVE THESE INSTRUCTIONS
The information contained in this manual will help you install the WallVIEW CCU system. For reference,
Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product drawings for
the Vaddio product line on the website. These documents can be downloaded from www.vaddio.com free of
charge.

IMPORTANT SAFEGUARDS
Read and understand all instructions before using. Do not operate any electrical device if it has been
dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To
reduce the risk of electric shock, do not immerse in any liquids and avoid extremely humid conditions.







INFORMATION
For RS-232 control information, please see the full-length Technical Manual for the SONY BRC-Z330. This
manual can be found either on the Vaddio or Sony website. Vaddio has also prepared a number of
TechNotes, specifications and drawings designed to inform and educate integrators on the value and the
specific uses of Vaddio products.

Figure 1:

WallVIEW CCU Z330 System

with Camera (not included), Wall Mount
and EZIM CCU (behind camera)

Use only the power supply provided with the WallVIEW CCU Z330 system.
Use of any unauthorized power supply will void any and all warranties.

Do not use “pass-thru” RJ-45 connectors. Use standard RJ-45 connectors for
best results.

Advertising
This manual is related to the following products: