American Bicycle Security Company BAX Series User Manual
Ba/bax rack
Product
BAX – Single Sided
BA – Double Sided
Capacity
BAX-2: 2 bikes
BAX-5: 5 bikes
BAX-8: 8 bikes
BA-4: 4 bikes
BA-5: 5 bikes
BA-9: 9 bikes
BA-15: 15 bikes
Sizes
BAX-2
19”L
19
3
/
4
”W 20
1
/
4
”H
BAX-5
67”L
19
3
/
4
”W 20
1
/
4
”H
BAX-8
115”L 19
3
/
4
”W 20
1
/
4
”H
BA-4
27”L
22”W
20
1
/
4
”H
BA-5
35”L
22”W
20
1
/
4
”H
BA-9
67”L
22”W
20
1
/
4
”H
BA-15
115”L
22”W
20
1
/
4
”H
Materials
Holders are made from ½” diameter bar.
Runners are made from 1½” X 1½” X
3
/
16
”
angle
Finishes
All parts are Hot-Dipped Galvanized after
fabrication
Assembly
1. Attach bike rack holders (A) to angle
runners (B) using
5
/
16
” x 1” bolts (D).
2. Depending on surface that the bike
rack is installed upon, the proper
anchors (C) must be installed. If on
concrete, use self setting anchors. If
on asphalt, it is recommended that a
footing of 6” dia. x 10” deep be
installed at each anchor hole.
(Anchors
are not included)
*Refer to diagram
American Bicycle Security Company
P.O. Box 7359
Ventura, CA 93006
Ph: (800) 245-3723 or (805) 933-3688
Fax: (805) 933-1865
Email: [email protected]
BA/BAX Rack
BAX
BA
85”
119”