AudioCodes MP-118 - Manual (Page 25)

Quick Installation Guide 3. Configuring the MediaPack
Version 5.0 25 September 2007
Table 3-3: Number Manipulation Parameters Description
Parameter Description
Source IP
(Applicable only to the
‘Destination Phone
Number Manipulation
Table for IP to Tel’) Source IP address of the call (obtained from the Contact header in the INVITE message).
Note:
The source IP address can include the ‘x’ wildcard to represent single digits. For
example: 10.8.8.xx represents all the addresses between 10.8.8.10 to 10.8.8.99. In addition,
the asterisk (*) wildcard represents any number between 0 and 255, e.g., 10.8.8.* represents all
addresses between 10.8.8.0 and 10.8.8.255.
Num of Stripped
Digits ƒ Enter the number of digits that you want to remove from the left of the telephone
number prefix. For example, if you enter 3 and the phone number is 5551234, the
new phone number is 1234.
ƒ Enter the number of digits in parenthesis (…) that you want to remove from the
right of the telephone number prefix.
Note: A combination of the two options is allowed, e.g., 2(3).
Prefix / Suffix to Add ƒ Add to prefix: Enter the number / string you want to add to the front of the phone
number. For example, if you enter 9 and the phone number is 1234, the new
number is 91234.
ƒ Add to suffix: Enter the number / string in parenthesis you want to add to the end of
the phone. For example, if you enter (00) and the phone number is 1234, the new
number is 123400.
Note: You can enter a prefix and a suffix in the same field, e.g., 9(00).
Number of Digits to
Leave Enter the number of digits that you want to leave from the right.
Presentation Select ‘Allowed’ to send Caller ID information when a call is made using these destination /
source prefixes.
Select ‘Restricted’ if you want to restrict Caller ID information for these prefixes.
3.3.2.4.1 Dialing Plan Notation
The dialing notation applies to numbers entered in the 'Destination Prefix' and 'Source Prefix'
fields of the Manipulation tables to represent multiple numbers.
Table 3-4: Dialing Plan Notations
Notation Description Example
[n-m] Represents a range of numbers.
Note:
range of letters is not supported.
[5551200-5551300]#: Represents all numbers from
5551200 to 5551300.
123[100-200]#: Represents all numbers from 123100 to
123200.
[n,m] Represents multiple numbers.
Note:
This notation only supports
single-digit numbers.
[2,3,4]xxx#: Represents four-digit numbers that start
with 2, 3 or 4.
x Represents any single digit. 54324: Represents any number that starts with 54324.
Pound sign (#) at
the end of a number Represents the end of a number. 54324xx#: Represents a 7 digit number that starts with
54324.
A single asterisk (*) Represents any number. *: Represents any number.
The gateway matches the rules starting at the top of the table (i.e., top rules take precedence
over lower rules). For this reason, enter more specific rules above more generic rules. For
example, if you enter 551 in entry 1 and 55 in entry 2, the gateway applies rule 1 to numbers that
start with 551 and applies rule 2 to numbers that start with 550, 552, 553, and so on (skipping
551). However if you enter 55 in entry 1 and 551 in entry 2, the gateway applies rule 1 to all
numbers that start with 55 including numbers that start with 551.