Lubrication – Hawk Industries Spinner Manual 950 PNEUMATIC Serial Numbers 81 to 189 User Manual

Page 19

Advertising
background image

19

Lubricant Required

1. Use the 7/16" wrench to remove

the rubber Safety shield bolts

(B).

2. Remove rubber Safety shield

(S).

3. While spinning out of the hole,

from the back of the spinner,

apply Pinion Grease Spray

(PGS) to all links of the chain.

4. Replace rubber Safety shield

(S).

5. Use the 7/16" wrench to replace

the rubber Safety shield bolts
(B).

Grease Once per Week

Chain

S

WARNING

Keep hands away from the main

drive sprocket while spraying the

chain.

B

PGS

Chevron Pinion Grease Spray

(Part # MS-SP), 7/16" wrench

WARNING

Run spinner only when gripped on

a pipe body.

NOTE

Never under any conditions apply

weight materials or any other dry

materials to the chain.

Lubrication

Maintenance & Repair

Advertising