Varad PLX318 User Manual

Installation guide, Diagram, Installation

Advertising
background image

Installation Guide

1

Contents

PLX312

PLX318

2

Diagram

Thank you for purchasing Illuminaire’s home theater lighting system.

You can use this guide to:

• Get familiar with your home theater lighting system.

• Installation.

• Operation.

LED light bars

Remote control

Lithium battery

Remote Control LED

Digital Controller

Clamps/Tape/Tie straps

Power supply

3

Installation

4 LED light bar ports

• The LED light bars should be installed 1”-2” from the edge

of the television and centered vertically (diagram 1). Use the

supplied tape, clamps and tie straps (diagram 2) for mounting.

• The Digital controller can be mounted to the rear of the

television or placed in any other suitable location.

• The remote control LED can be installed in any location

where it will be visible by the remote control transmitter.

• Plug the LED light bars into any of the 4 ports on the digital controller.

• Connect the power supply to the digital controller.

• Connect the remote control LED to the digital controller.

All excess cable should be bundled together for a clean appearance.

Proceed to section 4 for operation

Power supply port

Remote control LED port

1“-2”

Diagram 1

Back view of television

Diagram 2

Advertising
This manual is related to the following products: