Martin Universal Design U-DS90W Creation Station Drawer - Manual

4444 Lawton Avenue, Detroit, MI 48208 USA • Tel:(313)895-0700/Fax:(313)895-0709
Email: [email protected] • visit us at www.MartinUniversalDesign.com
U-DS90W Creation Station
Drawer Assembly Instructions
IMPORTANT
If you have difficulty assembling your U-DS90W Drawers or need customer service assistance.
Please call: Martin Universal Design, Inc. Customer Service Hot Line at 1-313-895-0700.
If you need additional parts, it is not necessary to contact your dealer,
our Customer Service Rep. will forward them to you immediately.
Revised June 07- RPI
Drawer Parts & Quantity
Top - 1 Piece Inside Section - 3 Pieces Drawers - 3 Pieces Bottom - 1 Piece
Assemble your drawers by
taking the bottom piece [C]
and snapping into place -
by lining up the tabs with the
grooves in the outside edge
of each sectional piece [B].
Repeat with all [3] section
pieces [B]. Complete Drawer
bank by snapping into place
the Top piece [A] into the top
section of part [B].
Finish by sliding the
[3] Drawers into the
drawer bank assembly.
A B C D
A
D
C
B
B
B
After proper assembly the
drawers should look like the
above illustration.