Martin Universal Design 91-1106 STILLETO CHAIR - Manual

IMPORTANT NOTICE
YOU WILL FEEL A SLIGHT
“BOUNCE-BACK” WHEN YOU SIT DOWN.
THIS IS NORMAL: NOT A DEFECT.
THE PNEUMATIC CYLINDER FOR THE SEAT
HEIGHT ADJUSTMENT REACTS TO YOUR
WEIGHT BY GIVING A LITTLE
STILETTO
Model 91-1106
Parts
A. [1] Base Plate &
Lever
B. [1] Cylinder
[
C. [1] Backrest
Support Bar
Note: Part [J] is
attached to part [C]
D. [1] 5-Star
Base
E. [5] Push-in
Castors
F. [1] Backrest G. [1] Seat
Note: Part [L] 4 screws
are attached to part [G]
H. [1] Backrest
Cover
K. [4] 3/4” Black Screws
Note: These screws are
attached to Part [G]
L. [2] 1” Black Screws
4444 Lawton Avenue, Detroit MI 48208 USA
Tel:(313)895-0700 • Fax:(313)895-0709
E-mail: [email protected]
Visit us at:
www.MartinUniversalDesign.com
Assembled 91-1106
I. [1] Foot Ring
J. [1] Knob
Note: This knob is
attached to Part [C]
IMPORTANT
If you have difficulty assembling your chair or need customer service assis-
tance. Please call: Martin Universal Design, Inc. Customer Service Hot Line at
1-313-895-0700. If you need additional parts, it is not necessary to contact your
dealer, our Customer Service Rep. will forward them to you immediately.
Created by RPI 0606