AutoTek Super Sport AT1000 - Manual (Page 2)

SUPER SPORT
AT-SERIES AMPLIFIERS
INDEX PAGE
Autotek is proud to introduce the finest high end car audio products available and would like to thank you for your continued support.
The Super Sport AT-Series amplifiers have been designed to a very high level of performance, with features unavailable in any other products.
All of the amplifiers have variable crossovers built in, with added touches such as High Level Inputs, Bass Equalization, Wide Range Crossover
controls with High Pass, Low Pass and selectable Mono / Stereo selector switch.
To insure years of listening pleasure, all amplifiers have a built in diagnostic mode that will detect shorted speaker leads, low impedance,
dangerous high temperatures, DC shorts and will shut down the amp to help prevent serious damage.
General Installation Procedures.....................................................................................................................................................................................1
- Mounting the amplifier / Wiring Requirements
Amplifier Feature Descriptions.......................................................................................................................................................................................2
AT1000 / AT1500 / 2-CHANNEL AMPLIFIER APPLICATIONS...................................................................................................................................3-4
- Full range stereo / Full range mono / 2 way active with mono bass using two 2 channel models
AT1200 / 4-CHANNEL AMPLIFIER APPLICATIONS.....................................................................................................................................................5
- Full range stereo / 3 channel full range system
AT2000.1 / AT3000.1 / 1-CHANNEL AMPLIFIER APPLICATIONS...............................................................................................................................6
- Basic A/B mono amplifier application
Features and Specifications...........................................................................................................................................................................................7
Setting Up Systems After Installation For Best Performance.....................................................................................................................................8
Troubleshooting and Diagnostics..................................................................................................................................................................................9
Product Warranty...........................................................................................................................................................................................................10
Available Optional Equipment
ATK2/3X
2-Way / 3-Way Active Crossover with Remote Bass Control
- 2 & 4 channel inputs / Sub-Input for receivers with Sub Outputs / Bass Remote offers 12dB Bass Boost / Adjustable Level Output to 8.5 volts /
- 180 degree Phase Shift / 45Hz Bass Boost with Quasi-Parametric EQ / Level (gain) adjustments for front, rear and sub outputs / 2nd Order Butterworth
- Hi-Pass for front and rear channels
7007
4-Band EQ / 9 Volt Line Driver Signal Processor
- 4 band EQ and Line Driver / Dual Inputs with Level Matching / DIN, ISO Mount chassis / EQ controls with 12dB of Bass Boost - cut 45Hz Sub Bass - 120Hz
- Mid Bass - 2.2KHz Mid Range - 12KHz Treble / Master Volume and Subwoofer Volume / Front to Rear dual amp Fader / High Pass F/R Crossover - 12dB
Slope / Selectable Subwoofer Output - 50Hz - 80Hz - 120Hz at 18dB Slope
MLX-100 Maxx-Link
Universal Linking (Strapping) Module
- Allows you to link (strap) multiple mono amplifiers into a Master/Slave configuration / Remote Level control with Clipping Indicator built-in & Master-Slave
- Control Switch / 24dB Adjustable Low Pass Filter 35Hz-250Hz / Built-In 65Hz Test Tone for Level matching / 24dB adjustable Subsonics Filter 15Hz-35Hz
- 10dB Adjustable Parametric Bass EQ / Variable Wide-Narrow Band Width control / 0-180 Degree Phase Shift / direct control of to 5 pairs of amplifiers &
more with Y-Cables / Pre-Soft and Hard Clipping Indicators on Bass Remote and Main Module.
The contents of this manual may not be reproduced or copied with out the
written consent of MAXXSONICS USA, Inc.