Rivera Primo Running Light & Turn Signal Wiring for 1116-0201LED HedLED - Manual

Running Light & Turn Signal Wiring
FOR 1116-0200 & 1116-0201 LED HEDLED™
INSTRUCTIONS
12450 Whittier Blvd. Whittier Ca. 90602
(562)907-2600 Fax: (562)907-2606
www.riveraprimoinc.com
Left Turn
Signal
Right Turn
Signal
Black/Ground
Red/12V
+
FOR TURN SIGNALS
1. Attach red 12V+ to 12V turn signal
switched feed for left and
right turn signal.
2. Attach black ground wire to a good
metallic grounding surface .
3. Plug in the mating connectors securely
with the connectors that come attached
to the headlight.
FOR RUNNING LIGHTS
1. Attach both left and right red 12V+ wires
together and then to 12V+ switched feed.
2. Attach both black ground wires to a good
metallic grounding surface
.
1116-0200
Mating Connector
3 Terminal
OE Connector
Scan with your smart
phone to access
www.riveraprimoinc.com
3.
Plug In Mating Connectors.
2.
Attach red + positive wires to
turn signal switched feed
1.
Attach black ground wire to a
good metallic grounding surface.
FOR HIGH & LOW BEAMS
1. Plug in the terminal OE connector
into the mating connector located
on the 1116-0200 head light.
1108-0027