AT&T 91-001105-040-100 - Manual (Page 17)

14
Telephone operation
Basic operation
Making and answering calls
To answer an incoming call, press any keys (except
CID
,
DIR
and OFF/
CLEAR
). To make a call,
press PHONE/
FLASH
or SPEAKER, then dial a
number. Press OFF/
CLEAR
to hang up.
To predial (preview numbers before dialing),
enter numbers first, then press PHONE/
FLASH
or
SPEAKER to dial. Press
CID
then
CHAN
/DELETE
anytime to make corrections when entering num-
bers.
The screen displays the elapsed time of the current
call (in hours, minutes and seconds).
NOTES:
1. The elapsed time format is in minutes and seconds
MM:SS until one hour has elapsed, then it will change to
hours, minutes and seconds H:MM:SS.
2. Pressing
PHONE
/FLASH to access service from your local
telephone service provider will not affect the elapsed time.
The elapsed time will not be carried over to the other cord-
less handset on a transferred call.
Hands-free speakerphone calls
To answer a call, press SPEAKER
.
To make
a call, press SPEAKER, then dial a number.
During a call press SPEAKER to switch between
hands-free speakerphone and normal handset
use. Press OFF/
CLEAR
to hang up.
NOTE: If a headset is plugged into the handset, the
handset speakerphone will be disabled.
SPEAKER 00:49
NOTE: Only one cord-
less handset can be on a call
at a time. If another cordless
handset attempts to join a
call, its screen will display
OTHER HANDSET ON and
then OR OUT OF RANGE.
PHONE ON 00:30
Elapsed
time