American International Fusion Scan 250 EX User Manual

User instructions

Advertising
background image

American DJ

®

6122 S. Eastern Ave.

Los Angeles Ca. 90040

www.americandj.com

Rev. 3/08

User Instructions

American DJ

®

- www.americandj.com - Fusion Scan 250 EX™ Instruction Manual Page 2

Unpacking:

Thank you for purchasing the Fusion Scan 250 EX™

by American DJ

®

. Every Fusion Scan 250 EX™ has been thoroughly

tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your
fixture for any damage and be sure all equipment necessary to oper-
ate the unit has arrived intact. In the event damage has been found
or parts are missing, please contact our toll free customer support
number for further instructions. Please do not return this unit to your
dealer without contacting customer support first.

Introduction:

The Fusion Scan 250 EX™ is a six channel, DMX intel-

ligent fixture. The fixture can used in three different operating modes;
stand alone, Master/Slave configuration, or DMX controlled. The
Fusion Scan 250 EX™ can be used as a stand alone sound active
fixture or used in multiples linked in a master/slave configuration. For
best results use fog or special effects smoke to enhance the beams
projections.

Customer Support:

American DJ

®

provides a toll free customer

support line, to provide help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacific Standard Time.

Voice:

(800) 322-6337

Fax:

(323) 582-2941

E-mail:

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

To prevent or reduce the risk of electrical shock or fire, do

not expose this unit to rain or moisture.

Warning!

This may cause severe eye damage. Avoid looking directly

into the light source at all times!

Fusion Scan 250 EX™

General Information

Advertising