Kramer Electronics XE-21H - Manual

P/N: 2900-000910
Your XE-21H 2x1 HDMI Switcher
Congratulations on purchasing your XE-21H, which is ideal for home theater, presentation and
multimedia applications. Your XE-21H 2x1 HDMI Switcher is a high quality switcher for HDMI
signals that accepts two HDMI inputs—letting you select either HDMI input using a switch
located on the panel—and routes the selected HDMI input signal to the HDMI output.
The XE-21H has a maximum data rate of 1.65Gbps, and uses an energy-saving 5V DC
power adapter that’s provided free!
Connecting the XE-21H 2x1 HDMI Switcher
To setup your XE-21H, connect:
1. Two HDMI sources (for example, DVD players) to the INPUT 1 and INPUT 2
connectors.
2. The OUTPUT connector to an HDMI acceptor (for example, a plasma display).
3. The 5V DC power adapter to the power socket and connect the adapter to the mains
electricity.
Note:
Use good quality connection cables to avoid interference, deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables) and position your product away from moisture, excessive sunlight and dust.
Caution – No operator-serviceable parts inside unit.
Warning – Use only the XE input power wall adapter that is provided with this unit.
Warning – Disconnect power and unplug unit from wall before installing or removing device or servicing unit.
For assistance, contact your dealer. Product Warranty is for one year.