RADWAG Low profiled scales - Manual (Page 14)

5. ASSEMBLY AND LEVELLING
5.1. Assembly of scales
5.1.1. 4 load cell platform scales
Before installing remove the transport protection.
Screw in levelling feet to mandrels placed in load cells
5.1.2. Ramp scales
Before setting the scale mount the steel camping ring (2) to the basis of
feet (1) using expanding ring (3) and then screw in the basis of the foot
(1) in the mandrel (4).
Put the scale on the flat ground. Put ramps on steel clampings. Take off
ramps and mark (through the holes in clampings) places for drilling holes
for anchors. After drilling mount clampings to the ground.
- 14 -